Solar Payback Calculator Australia
Estimate how much rooftop solar could save and how long it takes to pay for itself, using the official zone rating for your postcode. You enter your own prices from your electricity bill and solar quote. General information only – your bill and your installer's quote are what count. Want to know what one appliance costs to run? Use the quick check further down, or add several appliances in our appliance running cost calculator.
Solar payback
The starting numbers (6.6kW, Sydney postcode, 30%, 33c, 5c, $6,000) are only examples to show how it works. Replace them with your own.
How the solar estimate works
- Output. Your postcode is matched to one of four zones in the Clean Energy Regulator's zone ratings instrument, which sets how many MWh a year each kW of panels is deemed to produce. This is the same figure used to work out the federal solar rebate (STCs).
- Savings. Solar you use at home is valued at your electricity price. Solar you export is valued at your feed-in tariff.
- Payback. System cost ÷ yearly savings. This is the simple method in the NSW Government's solar battery guidance.
| Zone | Deemed output per kW | About per day | Examples |
|---|---|---|---|
| 1 | 1.622 MWh a year | 4.4kWh | Parts of central and northern Australia, e.g. Alice Springs (0870) |
| 2 | 1.536 MWh a year | 4.2kWh | Darwin (0800) and much of inland Queensland, NSW and WA |
| 3 | 1.382 MWh a year | 3.8kWh | Sydney (2000), Brisbane (4000), Adelaide (5000), Perth (6000), Canberra (2600) |
| 4 | 1.185 MWh a year | 3.2kWh | Melbourne (3000), Hobart (7000) |
Worked example (the starting numbers): 6.6kW × 1.382 MWh = about 9,121kWh a year. Using 30% at home: 2,736kWh × 33c = $903. Exporting the other 6,385kWh × 5c = $319. Total savings about $1,222 a year, so a $6,000 system pays back in about 4.9 years.
What the calculator leaves out
- Your roof. Zone ratings are averages. Panels facing east or west, a flat or steep roof, or shade from trees will usually produce less. Ask your installer for an estimate for your roof and enter it above.
- Changing prices. Electricity prices and feed-in tariffs change, often every year. Feed-in tariffs are set by your retailer (in Victoria, the Essential Services Commission also sets a minimum). Compare plans on the government's Energy Made Easy site (or Victorian Energy Compare in Victoria).
- Time-of-use tariffs. If your price changes by time of day, solar mostly offsets the daytime rate. Use that rate as your price.
- Batteries. A battery lets you use more of your own solar but adds a large upfront cost. The NSW Government notes that adding a battery generally has a longer payback than solar alone.
- Panel ageing, inverter replacement and finance costs. Not included. If you borrow to pay for solar, interest adds to the cost.
Before you get solar
- Get at least two written quotes. The NSW Government recommends a consultation with at least two accredited solar installers and comparing their options and costs.
- Check whether the price already includes the STC discount and any state rebate, such as those offered by Solar Victoria.
- Ask whether your network limits how much you can export, as an export limit lowers feed-in income.
- Look at your bills: how much of your power do you use during the day? This is the biggest factor in payback.
Quick check: what one appliance costs to run
For several appliances at once, or to use the Energy Rating label instead of watts, use our appliance running cost calculator.
The formula: watts ÷ 1,000 × hours × price per kWh. The examples below use 33c per kWh at full power.
| Power draw | For example | Per hour | 8 hours a day for 90 days |
|---|---|---|---|
| 40W | A fan on a medium setting | About 1c | About $9.50 |
| 150W | A portable evaporative cooler | About 5c | About $36 |
| 1,000W | A portable air conditioner on a lower load | 33c | About $238 |
| 2,400W | A heater on full | About 79c | About $570 |
These wattages are round examples, not the figures for any particular model. Check the rating plate or our guides below for real models. Many appliances draw less than their maximum once a room reaches the set temperature.
Comparing summer cooling? See our guides to fans, portable air conditioners and evaporative coolers. For winter, see portable heaters, and for damp rooms, dehumidifiers. Cooking? For small meals, an air fryer can use less energy than heating a full oven – see our air fryer guide.
Related guides
- Portable Heater Running Cost Per Hour – Cost per hour, per evening and per winter for six heaters, at three electricity rates.
- Dehumidifier Running Cost – Cost per hour, per day and per month for five models, at three electricity rates.
- Air Fryer vs Oven Running Cost – Power, cost per hour and cost per cook compared, with worked examples.
- Evaporative Cooler vs Air Conditioner – Which works in your climate, and what each costs to run per hour and per summer.
- Fan vs Air Conditioner Running Cost Overnight – What a fan and a portable air conditioner each cost for an 8-hour night.
- Portable Air Conditioner Running Cost – Cost per hour, per night and per summer for four models, at three electricity rates.
FAQ
How do I work out what an appliance costs to run?
Divide the appliance's power in watts by 1,000 to get kilowatts, then multiply by the hours it runs and your price per kWh. A 2,400W heater on full for one hour uses 2.4kWh, which costs about 79c at 33c per kWh.
How much electricity does a solar system make in Australia?
The Clean Energy Regulator's zone ratings deem each kW of panels to produce 1.185 to 1.622 MWh a year, depending on the postcode zone. In zone 3, which covers Sydney, Brisbane, Adelaide, Perth and Canberra, that's 1.382 MWh a year, or about 3.8kWh a day per kW. A 6.6kW system there is deemed to make about 9,100kWh a year. Real output depends on your roof, shading and weather.
How is the solar payback period calculated?
Divide the upfront cost of the system by the savings you expect each year, as the NSW Government's solar guidance suggests. Yearly savings are the solar you use at home multiplied by your electricity price, plus the solar you export multiplied by your feed-in tariff.
Why does using solar during the day matter so much?
Each kWh of solar you use yourself saves you your full electricity price, while each kWh you export usually earns only a feed-in tariff, which is often much lower. Running the dishwasher, washing machine, pool pump or air conditioner while the sun is out increases the share of solar you use and shortens the payback.
Does this calculator include the solar rebate?
Enter the price you'd actually pay after any discount for small-scale technology certificates (STCs) and any state rebate. Installers usually take the STC discount off the quoted price. Check your quote to see whether it has been included.
General information only, not financial advice. We don't recommend any electricity retailer, solar installer or finance product. Zone ratings and postcode zones are from the Renewable Energy (Electricity) (Zone Ratings and Zones for Solar (Photovoltaic) Systems) Instrument 2019 (F2019L01583), checked as in force in November 2026. How we research.